UFO DS 8650 - Инструкция (Страница 72)

EN-72
Setup2 Menu
1. Slide the mode switch to [ ].
2. Press the MENU button, and select the [Setup2] menu with the
X button.
J
The [Setup2] menu is displayed.
3. Select the desired [Setup2] option item with the S / T buttons,
and press the SET button to enter its respective menu.
4. Select the desired setting with the S / T buttons, and press the
SET button.
5. To exit from the menu, press the MENU button.
Date/Time
Refer to section in this manual titled “Setting the Date and Time” for further details.
Sys. Reset
This returns all basic settings to the camera’s default settings. The time setting will not be reset.
* Cancel / Execute
Language
Refer to section in this manual titled “Choosing the Display Language” for further details.
Video Output
This sets video output system of the video equipment that you are going to connect to the camera.
* NTSC / PAL
System Info.
This displays the firmware version of the camera.
Меню настройки 2
В меню настроек Вы можете определять параметры операционого окружения
камеры.
1. Переключатель режима в положении
2. Нажмите кнопку МЕНЮ и выберите меню [Setup2] c помощью кнопки
на дисплее появится [Setup2].
3. С помощью кнопок выберите нужный пункт меню и нажмите кнопку
УСТАНОВИТЬ, чтобы зайти в него.
4. С помощью тех же кнопок выберите нужное значение и нажмите кнопку
УСТАНОВИТЬ.
5. Чтобы выйти из меню видео, нажмите кнопку МЕНЮ.
EN-72
Setup2 Menu
1. Slide the mode switch to [ ].
2. Press the MENU button, and select the [Setup2] menu with the
X button.
J
The [Setup2] menu is displayed.
3. Select the desired [Setup2] option item with the S / T buttons,
and press the SET button to enter its respective menu.
4. Select the desired setting with the S / T buttons, and press the
SET button.
5. To exit from the menu, press the MENU button.
Date/Time
Refer to section in this manual titled “Setting the Date and Time” for further details.
Sys. Reset
This returns all basic settings to the camera’s default settings. The time setting will not be reset.
* Cancel / Execute
Language
Refer to section in this manual titled “Choosing the Display Language” for further details.
Video Output
This sets video output system of the video equipment that you are going to connect to the camera.
* NTSC / PAL
System Info.
This displays the firmware version of the camera.
Медия информация.
Показывает объем свободного места на SD карте или внутренней памяти. Если SD карта памяти отсутствует в
фотоаппарате, то показывается объем внутренней памяти.
Дата / Время
Дополнительную информацию можно найти в разеделе “Установка даты и времи“.
Сброс системы
Эта функция возвращает все ключевые установки камеры на значение по умолчанию. На дату и время,
установленные в камере, эта функция не влияет.
Отменить / Выполнить
Язык
Дополнительную информацию можно найти в разделе “Выбор языка”.
Видео выход
С помощью видео выхода Вы сможете соединить видео оборудование с камерой
* NTSC/PAL
Информация о системе
Показывает версию программного обеспечения камеры.
EN-71
Setup1 Menu
Set your camera’s operating environment.
1. Slide the mode switch to [
].
2. Press the MENU button, and select the [Setup1] menu with the
X button.
J
The [Setup1] menu is displayed.
3. Select the desired setting with the S / T buttons, and press the
SET button to enter its respective menu.
4. Select the desired setting with the S / T buttons, and press the
SET button.
5. To exit from the menu, press the MENU button.
Media Info.
This displays the free capacity of the SD memory card (or internal memory). If the SD memory card is not
inserted, free capacity of internal memory is displayed.
Fr. No. Reset
This creates a new folder. The photographed images are recorded to the newly created folder from
number 0001.
* Cancel / Execute
Format
Refer to section in this manual titled “Formatting an SD Memory Card or Internal Memory” for further details.
Beep
Refer to section in this manual titled “Beep” in Photography Menu (Function tab) for further details.
Auto OFF
If no operation is performed for a specific period of time, the power to the camera is automatically turned
off. This feature is useful to reduce battery wear.
* 1 Min. / 2 Min. / 3 Min.
EN-71
Setup1 Menu
Set your camera’s operating environment.
1. Slide the mode switch to [
].
2. Press the MENU button, and select the [Setup1] menu with the
X button.
J
The [Setup1] menu is displayed.
3. Select the desired setting with the S / T buttons, and press the
SET button to enter its respective menu.
4. Select the desired setting with the S / T buttons, and press the
SET button.
5. To exit from the menu, press the MENU button.
Media Info.
This displays the free capacity of the SD memory card (or internal memory). If the SD memory card is not
inserted, free capacity of internal memory is displayed.
Fr. No. Reset
This creates a new folder. The photographed images are recorded to the newly created folder from
number 0001.
* Cancel / Execute
Format
Refer to section in this manual titled “Formatting an SD Memory Card or Internal Memory” for further details.
Beep
Refer to section in this manual titled “Beep” in Photography Menu (Function tab) for further details.
Auto OFF
If no operation is performed for a specific period of time, the power to the camera is automatically turned
off. This feature is useful to reduce battery wear.
* 1 Min. / 2 Min. / 3 Min.
EN-72
Setup2 Menu
1. Slide the mode switch to [ ].
2. Press the MENU button, and select the [Setup2] menu with the
X button.
J
The [Setup2] menu is displayed.
3. Select the desired [Setup2] option item with the S / T buttons,
and press the SET button to enter its respective menu.
4. Select the desired setting with the S / T buttons, and press the
SET button.
5. To exit from the menu, press the MENU button.
Date/Time
Refer to section in this manual titled “Setting the Date and Time” for further details.
Sys. Reset
This returns all basic settings to the camera’s default settings. The time setting will not be reset.
* Cancel / Execute
Language
Refer to section in this manual titled “Choosing the Display Language” for further details.
Video Output
This sets video output system of the video equipment that you are going to connect to the camera.
* NTSC / PAL
System Info.
This displays the firmware version of the camera.