UFO DS 8650 - Инструкция (Страница 24)

EN-24
Setting the Date and Time
The date/time needs to be set if/when:
Camera is turned on for the first time.
Camera is turned on after leaving the camera without the battery for an extended period of time.
When the date and time information is not displayed on the LCD monitor, follow these steps to set the
correct date and time.
1. Slide the mode switch to [
], and press the MENU button.
2. Select [Setup2] with the X button.
3. Select [Date/Time] with the S / T buttons, and press the
SET
button.
The Date/Time setting screen will be displayed.
4. Select the item’s field with the W / X buttons and adjust the
value for the date and time with the S / T buttons.
The date and time is set in the order year-month-day-hour-
minute.
The time is displayed in 24-hour format.
5. After confirming all settings are correct, press the SET button.
The setting will be stored and the screen will return to the
Setup2 menu.
6. To exit from the Setup2 menu, press the MENU button.
EN-24
Setting the Date and Time
The date/time needs to be set if/when:
Camera is turned on for the first time.
Camera is turned on after leaving the camera without the battery for an extended period of time.
When the date and time information is not displayed on the LCD monitor, follow these steps to set the
correct date and time.
1. Slide the mode switch to [
], and press the MENU button.
2. Select [Setup2] with the X button.
3. Select [Date/Time] with the S / T buttons, and press the
SET
button.
The Date/Time setting screen will be displayed.
4. Select the item’s field with the W / X buttons and adjust the
value for the date and time with the S / T buttons.
The date and time is set in the order year-month-day-hour-
minute.
The time is displayed in 24-hour format.
5. After confirming all settings are correct, press the SET button.
The setting will be stored and the screen will return to the
Setup2 menu.
6. To exit from the Setup2 menu, press the MENU button.