ViTESSE VS-202 - Инструкция (Страница 3)

1
2
PUSH
3
www.vitesse.ru
P/3 P/4
1. pulse
2. on
3. off
- Pulse button must be pressed and held for unit to
operate. When released, unit will stop. Use PULSE
for short processing tasks, such as chopping nuts,
raw meats, or vegetables. This lets you check
processed results and control the consistency.
- When this button is pressed, unit runs continuously
until OFF button is pressed.
- Processor should always be left in OFF position
when not in use.
2
3
1 pulse
off
on
USING YOUR FOOD PROCESSOR
Note:
Important:
How to assemble the Bowl
Do not attempt to chop ice in this food processor; it will damage the bowl and
dull the Chopping Blade. This unit will not whip cream, beat egg whites to a
desirable volume, grind coffee beans, spices or other items with high oil content,
or slice or shred hard-cooked eggs, marshmallows, or soft cheeses.
For your protection, this unit has an interlock system. The processor
will not operate unless the bowl is properly locked onto the base and cover is
properly locked onto the bowl. Do not attempt to operate the unit without the bowl
lid, bowl and food chute Lid correctly in place. Be sure base is on a flat, dry and
clean surface before you begin processing.
Align the base and bowl as illustrated Fig. 1. Align the
bowl handle with the UNLOCK mark on the base. Turn
the bowl counterclockwise until it clicks onto the base.
The bowl handle should now align with the LOCK mark
on the base.
Note: There is only one position for the bowl to lock onto
the base. The unit will not operate if the bowl does not
lock onto the base.
Fig. 1
How to lock the Cover
lock unlock
Open the Food Chute Lid (see section below on “How
to open Food Chute Lid”). Place the cover onto the
bowl. Align the q
mark on the cover and the UNLOCK
mark on the bowl (as illustrated in Fig. 2). Twist the
cover counter-clockwise towards LOCK until it clicks
onto the bowl. The q
mark on the cover should now
align with the LOCK mark on the bowl.
Note: When cover is locked into position, the safety
mechanism on the cover and bowl will align. The unit
will not operate if the cover is not locked onto bowl. Fig. 2
How to lock the Food Chute Lid
Grasp the removable loop; rotate the food chute lid to
make the removable loop fit into the food chute.
As illustrated in Fig. 3.
Fig. 3
Push down the Movable loop into the food chute.
As illustrated in the Fig. 4.
Push on the tab of Movable Loop to latch the Food
Chute lid onto the food chute.
As illustrated in Fig. 5.
Note: Unit will not operate if the food chute lid does not
latch onto the food chute.
Fig. 4
Fig. 5
How to Open the Food Chute Lid
2 1
3 1. Pull up the Movable Loop
2. Pull slide release button
out
3. Pull back the food chute lid
and Movable loop
Note: Before opening food
chute lid, turn the unit OFF
and unplug the cord.
Fig. 6 Fig. 7
Bowl
Base
Food
chute lid
Movable
loop