Electrolux EOB6850AOX - Инструкция (Страница 12)

onds. You will see the heat-up indicator
alternates.
5.11 Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
5.12 Energy saving
The appliance contains fea-
tures which help you save en-
ergy during everyday cooking:
• Residual heat:
– When the heating function or pro-
gramme operates, the heating ele-
ments are deactivated 10 % earlier
(the lamp and fan continue to oper-
ate). For this feature to operate, the
cooking time must be longer than 30
minutes or you must use the clock
functions ( Duration , End Time ).
– When the appliance is off, you can
use the heat to keep food warm. The
display shows the remaining temper-
ature.
• Deactivating the display - If necessa-
ry, you can fully deactivate the appli-
ance. Touch
and at the same
time until the display goes out. This
step also activates the appliance.
• Cooking with the lamp off - Touch
and hold for 3 seconds to deacti-
vate the lamp during cooking.
• Eco functions - refer to " Heating
Functions ".
6. CLOCK FUNCTIONS
6.1 Clock functions
Symbol Function Description
Minute Minder
To set a countdown (max 2 h 30 min). This function
has no effect on the operation of the appliance. You
can also activate it when the appliance is off. Use
to activate the function. Press
or to set the
minutes and OK to start.
Duration
To set how long the appliance has to be in opera-
tion (max. 23 h 59 min).
End Time
To set the switch-off time for a heating function
(max. 23 h 59 min).
If you set the time for a clock function, the
time starts to count down after 5 sec-
onds.
If you use the clock functions Du-
ration
and End Time ,
the appliance deactivates the
heating elements after 90 % of the
set time. The appliance uses the
residual heat to continue the
cooking procedure until the time
ends (3 - 20 minutes).
Setting the clock functions
1. Set a heating function.
2.
Press again and again until the
display shows the necessary clock
function and the related symbol.
3.
Press or to set the necessary
time. Press OK to confirm.
When the time ends, an acoustic sig-
nal sounds. The appliance deacti-
vates. The display shows a message.
4. Press a sensor field to stop the signal.
12 www.electrolux.com