Multifunctional clock, Operation manual – Инструкция по эксплуатации ASSISTANT AH-1047
Страница 4
ENGlISH
– 2 –
ENGlISH
ENGlISH
– 3 –
ENGlISH
ENGlISH
– 4 –
ENGlISH
ENGlISH
– 1 –
ENGlISH
ENGlISH
– 6 –
ENGlISH
ENGlISH
– 7 –
ENGlISH
ENGlISH
– 5 –
ENGlISH
WWW.TIWELL.COM
WWW.ASSISTANT.uA
MULTIFUNCTIONAL CLOCK
Model AH-1047
OpERATION MANuAL
SpECIFICATIONS
Calendar with day-of-the-week display.
Hour, Minute and Second display.
12 or 24 hour format.
Crystal oscillator frequency : 32.768kHz.
Time accuracy : average within 60 seconds per
month.
Operating temperature from 0°C to 50°C (32°F to
122°F).
Temperature measuring range from -9.9°C to 50°C
(14.2°F to 122°F).
Temperature resolution 0.1°C/°F.
Battery life: approximately 1 year.
Atteention
The configuration of your clock may differ somewhat
from that shown in the illustration.
”AA” or “AAA” size battery. This clock may use more
than one piece of battery. Please refer to the engraved
battery marks inside the battery compartment for
the correct battery type, polarity (+) and (-).
Battery Installation
1. Open the battery door.
2. Insert batteries in polarity (+) and (-) as indicated.
3. Close the battery door.
Warning :
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or
rechargeable (nickel cadmium) batteries.
SET THE CLOCk
To Set the language
1. Press and hold the [SET] button for couple of sec-
onds will goes to language set mode.
2. Press [-] key to toggle different language.
To Set the Calendar
1. Press [SET] button to active calendar set mode.
2. Press [+] or [-] button sequentially to set year.
3. Holding down either [+] or [-] button change the
year at high speed.
4. Press SET button to confirm year set and goes to
date set.
5. Press [+] or [-] button sequentially to set date.
6. Holding down either [+] or [-] button change the
date at high speed.
To Set the Time
1. Press [SET] button after calendar set mode.
2. Press [+] or [-] button sequentially to set minutes,
when you press the [+] or [-] button once, the seconds
count reset to 00.
3. Holding down either [+] or [-] button change the
time at high speed.
To Set the Format
1. Press [SET] button after desire time set and goes to
format set mode.
2. Press [+] button to toggle between 12hr and 24hr
time display format.
3. Press [-] button to toggle between°C and°F temper-
ature display format.
4. Press SET button to confirm and quit the set mode.
uSING ALARM
To Set Alarm Time
1. Press [+] or [-] button sequentially to set the alarm
time, the alarm time will be shown at time display with
AL icon turned on.
2. Holding down either [+] or [-] button change the
alarm time at high speed.
To Active Alarm Function
1. Slide the alarm switch to “ALARM ON” position, the
alarm function is activated.
2. When the alarm sound, press the [SNOOZE/LIGHT]
button. The alarm will sound the same time of the next
day.
3. To deactivate the alarm function, slide the alarm
switch to “ALARM OFF”.
To Active the Snooze Alarm
1. Slide the alarm to “SNOOZE” position, the sign
“ ” and “Zz” will appear on the time display. The snooze
function is activated.
2. When the alarm sound, press the [SNOOZE/LIGHT]
button. The alarm will sound again in approximately 5
minutes.
3. To deactivate the snooze alarm, Slide the [ALARM]
key until the “ ” and “Zz” disappear.
CHECk TEMpERATuRE
The temperature is displayed on the temperature
field, “Hi” and “Lo” will be shown if the temperature is out
of the measurement range.
RESETTING THE uNIT
If the unit does not work properly, reset it by pressing
the [RESET] button.
CARE OF YOuR CLOCk
Avoid exposing your clock to extreme temperatures,
water or severe shock.
Avoid contact with any corrosive materials such as
perfume, alcohol or cleaning agents.
Do not subject the clock to excessive force, shock,
dust, temperature or humidity. Any of these
conditions may shorten the life of the clock.
Do not tamper with any of the internal components
of this clock. This will invalidate the warranty and
may cause damage.